KIA78R33PI Low Drop Voltage Regulator, Pinout Diagram, Features & Datasheet

by

Pin Configuration

Pin No.

Pin Name

Description

1

Input (VIN)

Unregulated Input Voltage

2

Output (VO)

Regulated Outputs

3

GND

Connected to Ground

4

ON/OFF Control (VC) / Adjustable

Used for Variable Power Supply or for ON/OFF Control

KIA78R033PI Regulator Features

  • 0A Output Low Drop Voltage Regulator
  • Built in ON/OFF Control Terminal. (Active High)
  • Built in Over Current Protection, Over Heat Protection Function
  • Low Quiescent Current (Output OFF mode) : 0.5 A(Typ.)
  • Low Standby Current : 800 A(Typ.)
  • PI-220IS-4 Package

KIA78R033PI Electrical Specification

  • Maximum Input Voltage VIN is 16 V
  • 3 VDC output voltage rating
  • Maximum Output Current IOUTis 1 A
  • Maximum ON/OFF Control Voltage VCis 16 V
  • Maximum Power Dissipation 1 (No heat sink) for PI package is 1.5 W
  • Power Dissipation 2 (Infinite heat sink) for PI package is 15 W
  • Operating Temperature Topr is 20 – 80 °C

Brief Description on KIA78R033PI Voltage Regulator

KIA78R033PI is a 4 terminal low drop voltage regulator. It has regulated voltage of 3.3 VDC. The output current of the KIA78R033PI is 1.0A. They have an adjustable pin which can be used in two modes one as an adjustable voltage regulator and secondly it can be used for ON/OFF control function. Logic Level ON/OFF Control (TTL−CMOS Compatible) can be used to control the ON/OFF function using Adjustable Pin 4. The maximum ON/OFF Control Voltage VC that can be applied is 16 VDC. The Regulator has multi-function such as over current protection, Overheat protection.

How to Use KIA78R033PI as Adjustable Voltage Regulator?

KIA78R033PI can also be used as adjustable voltage regulator using its Adjustable pin (pin4) so that its output voltage can be varied to the desired value using the above circuit.

Here, the input voltage VIN can be anywhere between 4.3V-12V. The output voltage can be adjusted using the value of resistance R1 and R2. The value can be calculated using the below formulae.

VOUT = VREF x ( 1 + (R2/R1)) = 1.25 x ( 1 +(R2/R1))

VREF = 1.25 V

In Fixed type of voltage regulator the Adjustable pin (Pin4) is not used.

KIA78R033PI Regulator Applications

  • Constant Voltage regulator
  • Adjustable Output Regulator
  • Current Limiter for certain applications
  • Over current protection
  • Overheat protection
  • Reverse Battery Protection

2D Model

Component Datasheet PDF: KIA78R33PI Low Drop Voltage Regulator Datasheet

 

Leave a Comment